In CADWorx Plant we can apply Size rule for placing the component with respect to the main size in plant configuration or respect to spec viewer
Go to CADWorx Plant Setup > Piping Rules > Select pulldown menu in “Apply Size
How to Split up the Auto generated Isometric drawings.
Step 1
Go to I-Configure > Edit the required ISO project > Drawing Manager > Drawing Generation > Drawing Splitting > untick the Check box called “Automatic Drawing Splitting”.
Step 2
Go to I-Configure > Edit the required ISO project > Drawing Manager > Drawing Generation >
Total Center of Gravity Generator
CADWorx Plant I tab: Pipe BOM / DB > C.G. Generator
Plant menu: Accessory > C.G. Generator
Command line: TCG
Calculates center of gravity for all components drawn in X,
Whenever Pressure Vessel or Heat exchanger (Static Equipments) nozzle loads exceeds the allowable values provided by Vendors (Equipment manufacturer) or standard project specific tables (guidelines), the piping stress professional is permitted to use WRC 107/297 (or any other FEA) to check the
How to Change Text Alignment in Isometric Drawing
Default Output of the Isometric Drawing
To change it to ISO align Text
Go to I-Configure è Edit the required
Date: July 08, 2015
Time: 09.00 AM(Qatar, Kuwait, Bahrain)
10.00 AM (UAE, Oman)
11.30 AM (India)
Duration: 30 Min Cost: Free Webinar
We’ll provide an overview of how to model your Incompressible system using AFT Fathom software. This Webinar covers
Those who are extensively using Caesar II software must have noted that sometimes few Caesar II files got corrupted due to some reason. And modeling the same file from isometric again is time consuming. At the same time the man
CADWorx Plant I tab: Misc > Change Elevation
Command line: CHANGEELEVATION
Changes the elevation of a selected pipe in the drawing.
Pick – Enables you to select the location for the change in the
We hope you enjoyed our webinar. For your reference we have attached the link for the recording. Please feel free send us your feedback: support@igfzco.com
